Izdelki za skupni kremen 5w40 (3)

Xtreme 8003 C3 ECO SYNT 5W40 è un lubrificante sintetico per auto di ultima generazione, la sua formulazione e l’utilizzo di materie prime accuratamente selezionate ne garantiscono eccezionali prestazioni nei moderni motori a benzina e gasolio, aspirati e turbocompressi operanti anche in condizioni gravose. Il lubrificante per motori Xtreme 8003 ECO SYNT 5W40 è pienamente compatibile con tutti i dispositivi di controllo delle emissioni inquinanti (p.es. DPF – Diesel Particulate Filter) e supera gli standard prestazionali richiesti dalle principali case costruttrici di autoveicoli. Specifiche: MB-APPROVAL 229.51 - VW 502.00/505.00/505.01 - BMW LL 04

Our pre-treatment degreaser is the ideal solution for removing stains from fabrics. Thanks to its advanced formula, this product is able to act effectively on a wide range of stains, such as grease, oil, wine, coffee stains and more. Our pre-treatment degreaser is easy to use, it can be diluted and used by spraying it directly on the stain, leaving it to act for a few minutes before putting it in the washing machine or dosing it directly during washing. The stain will disappear without leaving any traces.

An anti-dust chemical/mechanical revitalising hardener for concrete flooring and screeds, consisting of an aqueous solution of mineral silicates and fluosilicates, activated by specific wetting agents. It is applied in several coats of decreasing dilution in water, with a brush or mechanical “scrubber”. Specific anti-dust treatments for industrial flooring or concrete slabs that have lost their original “vitality”. It reacts with the calcium compounds, soluble and unstable, present in of concrete products, transforming them into new stable, insoluble and resistant compounds. Consequent increases in resistance to wear and tear of the order of 200% -400%, significant increases in chemical stability, resistance to freeze-thaw cycles etc. Reactive impregnations for stabilising chemical and mechanical structures and concrete products. Hardening, anti-dust, anti abrasive and anti-corrosion treatments for concrete floorings. Adjustment of the chemical and mechanical performance of products for the industrial, rural and livestock construction (on horizontal surfaces). Apply, preferably with a brush or with "washer dryer" machine on the basis of the following indications: - Porous surfaces: repeated applications of a solution of water and QL Fluosil at a ratio in 1:1 - Compact surfaces: apply three coats, with decreasing dilution with water. 1a coat 1:3, 2a coat 1:2, 3a coat 1:1. The consumption of QL Fluosil will be proportional to the absorption of the floor to be treated. Indicatively a porous surface will consume about 400 g/m², while a surface with normal porosity will consume 250-300 g/m². Leave the product to dry between one coat and the next and then, after the last coat, wash with copious amounts of water. Protect glass and aluminium surfaces during application. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".